Optimization of Tractor Tire Tread Structure Using Finite Element Method
DOI:
https://doi.org/10.5281/zenodo.10396136Keywords:
Mooney-Rivlin, Optimization, Finite Elements, TractorAbstract
In this study, the tractor tire used for the field was modeled using the Visual Media Finite Element Analysis (FEA) technique and the tire life of this model was tried to be estimated by using the ANSYS software. Mooney-Rivlin was chosen as the tire material because it is a material with high elasticity and behaves in accordance with the mechanics and behavior of the rubber used in tires. The wheel model is modeled as solid, consisting of Solid186 elements.
References
M. Fu, "Application of Finite Element Method in the Noise Optimization of New Energy Vehicles," International Journal of Engineering Research & Technology (IJERT), vol. 17, no. 22, 2023. https://dx.doi.org/10.46300/9106.2023.17.22.
R. L. Meena, A. Kumar, and B. Yadav, "Optimization of Frame Design for Maize Cob Harvester Operated by Tractor Using Finite Element Method," International Journal of Plant & Soil Science, vol. 35, no. 3, pp. 50-58, 2023. https://dx.doi.org/10.9734/ijpss/2023/v35i32787.
L. Ge, Y. Li, and Y. Zhao, "Analysis of the Influence of Complex Tire Tread Patterns on Cornering Characteristics and Rolling Resistance," Advances in Mechanical Engineering, vol. 15, no. 1, 2023. https://dx.doi.org/10.1177/16878132231153373.
V. Odintsov, "Calculation of Critical Speed for Rolling Radial Tires," Mechanical Engineering, vol. 12, pp. 70-79, 2022. https://dx.doi.org/10.18698/0536-1044-2022-12-70-79.
A. Koca, “Lastik Hava Basinci Ve Taşit Hizinin Dinamik Yariçap Değişimine Etkilerinin Deneysel Olarak İncelenmesi”, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Derg., c. 22, sayı 3, ss. 305–311, 2007.
A. Yahya, M. Zohadie, D. Ahmad, A. K. Elwaleed, ve A. F. Kheiralla, “UPM indoor tyre traction testing facility”, J. Terramechanics, c. 44, sayı 4, ss. 293–301, Eki. 2007.
Ş. Ekinci ve K. Çarman, “Lastik Çeki Performansı Araştırmalarında Kullanılabilecek Tek Tekerlek Test Düzeneğinin Geliştirilmesi”, Tarım Makinaları Bilim. Derg., c. 8, sayı 2, ss. 249–255, 2012.
E. C. Burt, P. W. L. Lyne, P. Meiring, ve J. F. Keen, “Ballast and Inflation Effects on Tire Efficiency”, Trans. ASAE, c. 26, sayı 5, ss. 1352–1354, 1983.
K. Çarman ve C. Aydın, “Load and velocity effects on tire”, Int. Conf. Agric. Eng. Budapest, 2002.
Z. El-Sayegh, M. Sharifi, F. Gheshlaghi, ve A. Mardani, “Development of an HLFS agricultural tire model using FEA technique”, SN Appl. Sci., c. 1, sayı 11, ss. 1–10, 2019.
M. Cerit, “Numerical simulation of dynamic side impact test for an aluminium alloy wheel”, Sci. Res. Essays, c. 5, sayı 18, ss. 2694–2701, 2010.
Downloads
Published
Issue
Section
License
Copyright (c) 2023 AINTELIA Science Notes Journal
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
COPYRIGHT NOTICE
Authors submitting a manuscript do so on the understanding that if accepted for publication, copyright of the article shall be assigned to Aintelia® Science Notes Journal (ASNJ).
By submitting their work, authors agree to the following terms:
-
Copyright Transfer: Copyright of the published article is transferred to Aintelia® Science Notes Journal. The journal reserves the right to publish, reproduce, distribute, and archive the work.
-
Licensing: While the journal retains the copyright, the article is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). This allows third parties to share and adapt the work for non-commercial purposes, provided the original work and the journal are properly cited.
-
Author Rights: Authors retain the right to use their article for their own scholarly needs, such as including it in a thesis or dissertation, presenting it at conferences, or distributing it to students for educational purposes, provided that the journal is cited as the original publisher.
