The Effect of Rotor Slot Number on the Performance of Asynchronous Motors in Light Electric Vehicle
DOI:
https://doi.org/10.5281/zenodo.10473132Anahtar Kelimeler:
Asynchronous motor- Light electric vehicle- Slot numberÖz
Light electric vehicles provide significant advantages in reducing environmental pollution and increasing efficiency in urban transportation. The performance of the motor directly affects the overall performance of electric vehicles. This study investigates the performance analysis of asynchronous motors designed for light electric vehicles used in urban transportation. The initial design parameters of the motor are specified, and various motor structures designed with changes in the rotor slot number are presented. Additionally, the effects of the slot number on the motor's magnetic circuit and performance are discussed. Finite Element Analysis (FEA) is used to investigate the motor's performance. Performance parameters such as efficiency, magnetic flux density, weight, starting torque, and power factor are obtained for different slot numbers. The results indicate that the rotor slot number is a critical design parameter affecting motor performance. In particular, it is stated that maximum efficiency can be achieved with a certain slot number, but an excessive increase in the slot number may have adverse effects on performance.
Referanslar
Hawkins, T.R., Gausen O.M., and Strømman, A.H., “Environmental impacts of hybrid and electric vehicles—a review”, The International Journal of Life Cycle Assessment, Vol. 17, 997-1014, 2012.
Figenbaum, E., Kolbenstvedt, M., and Elvebakk, B., “Electric Vehicles–Environmental, Economic and Practical Aspects. As seen by current and potential users”, Institute of Transport Economics Norwegian Centre for Transport Research, Oslo, Norway, 2014.
De Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., and Leijon, M., “Electrical motor drivelines in commercial all-electric vehicles: A review”, IEEE Transactions on Vehicular Technology, Vol. 61(2), 475-484, 2012.
Emadi, A., Lee, Y. J., and Rajashekara, K., “Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles”, IEEE Transactions on Industrial Electronics, Vol. 55(6), 2237-2245, 2008.
Yadav, D. S., and Manisha, M., “Electric Propulsion Motors: A Comparative Review for Electric and Hybrid Electric Vehicles”, International Conference on Distributed Computing and Electrical Circuits and Electronics, 1-6, Ballari, India, 2022.
Cao, Z., Mahmoudi, A., Kahourzade, S., and Soong, W. L., “An overview of electric motors for electric vehicles”, 31st Australasian Universities Power Engineering Conference, 1-6, Perth, Australia, 2021.
Selvakumar, S. G., “Electric and Hybrid Vehicles–A Comprehensive Overview”, International Conference on Electrical Power and Energy Systems, 1-6, Bhopal, India, 2021.
Haque, M. R., and Khan, S., “The modified proportional integral controller for the BLDC motor and electric vehicle”, International IOT, Electronics and Mechatronics Conference, 1-5, Toronto, ON, Canada, 2021.
Aliasand, A. E., and Josh, F. T., “Selection of motor for an electric vehicle: A review”, Materials Today: Proceedings, Vol. 24(3), 1804-1815, 2020.
Venkitaraman, A. K., and Kosuru, V. S. R., “Trends and challenges in electric vehicle motor drivelines-A review”, International Journal of Electrical and Computer Engineering Systems, 14(4), 485-495, 2023.
Vinh, V. Q., and Ha, V. T., “Improved Torque Ripple of Switched Reluctance Motors using Sliding Mode Control for Electric Vehicles”, Engineering, Technology & Applied Science Research, 13(1), 10140-10144, 2023.
Merve, Ş. K., “The Use of Induction Motors in Electric Vehicles. In Induction Motors-Recent Advances, New Perspectives and Applications”, IntechOpen, 2023, doi: 10.5772/intechopen.1000865.
Jyothi, B., Bhavana, P., Sarada, K., and Srikanth, M., “Analysis of Z-Source inverter fed asynchronous motor for electric vehicle applications”, IOP Conference Series: Materials Science and Engineering, Vol. 993(1), 012087, 2020.
Yan, Y., Wang, S., Yang, T., and Meng, X., “Design and Analysis of New Asynchronous Motor Type for Electric Vehicle”, Journal of Advanced Computational Intelligence and Intelligent Informatics, 24(7), 908-916, 2020.
Özbay, H., Közkurt, C., Dalcalı, A., and Tektaş, M., “Geleceğin Ulaşım Tercihi: Elektrikli Araçlar”, Akıllı Ulaşım Sistemleri ve Uygulamaları Dergisi, 3 (1), 34-50, 2020.
Lei, G., Zhu, J., Guo, Y., Liu, C., and Ma, B., “A review of design optimization methods for electrical machines”, Energies, 10(12), 1962, 2017.
Dalcali, A., and Akbaba, M., “Comparison of 2D and 3D magnetic field analysis of single-phase shaded pole induction motors”, Engineering Science and Technology, an International Journal, 19(1), 1-7, 2016.
Yayınlanmış
Sayı
Bölüm
Lisans
Telif Hakkı (c) 2023 AINTELIA Science Notes Journal
Bu çalışma Creative Commons Attribution-NonCommercial 4.0 International License ile lisanslanmıştır.
TELİF HAKKI BİLDİRİMİ
Makale gönderen yazarlar, makaleleri yayınlanmak üzere kabul edildiğinde, makalenin telif hakkının Aintelia® Science Notes Journal (ASNJ)'a devredileceğini kabul ederler.
Yazarlar, çalışmalarını göndererek aşağıdaki şartları kabul ederler:
- Telif Hakkı Devri: Yayınlanan makalenin telif hakkı Aintelia® Science Notes Journal'a devredilir. Dergi, çalışmayı yayınlama, çoğaltma, dağıtma ve arşivleme hakkını saklı tutar.
- Lisanslama: Dergi telif hakkını elinde tutarken, makale Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0) lisansı altında lisanslanmıştır. Üçüncü şahısların, orijinal çalışma ve dergi uygun şekilde alıntılanmak kaydıyla, çalışmayı ticari olmayan amaçlarla paylaşmasına ve uyarlamasına izin vermektedir.
- Yazar Hakları: Yazarlar, dergi orijinal yayıncı olarak belirtildiği sürece, makalelerini tez veya bitirme tezine dahil etmek, konferanslarda sunmak veya eğitim amaçlı olarak öğrencilere dağıtmak gibi kendi akademik ihtiyaçları için kullanma hakkı saklıdır.
